Circular Saw Blades
Combined Saw & Knife stocks a large inventory of TCT Circular Saw Blades from manufacturers such as Stark, Dart & Opteco. In addition to supplying Australia with Circular Saw Blades, we also offer a superior circular saw blade sharpening service to breathe new life into your used saw blades.
Trouble finding your desired circular saw blade requirement below? Contact us today so we can assist!
Opteco 300mm x 96T ATB 30°
Part Number
9113003096 - 300mm x 30mm bore x 96T x 3.2/2.2mm kerf/plate ATB 30° - Fine cut, joinery/panel sizing
Application
For use in panel or table saws cutting laminated MDF or particle boards, rigid plastics and acrylics, plywood, and trimming cuts in solid wood. For clean cut without scorer blade.
Features
Ultra sharp 30° ATB tooth.
Shipping
Usually ships within 2-5 business days, we will notify you if there are any further delays. Please allow up to 7 days for remote areas.
Also Available:
Saw Blade Bushes
Opteco 300mm x 96T Constellation saw
Part Number
8223003096 - 300mm x 30mm bore x 96T x 3.2/2.2mm kerf/plate T.Chip - Fine cut, joinery/panel sizing CONSTELLATION SAW
Application
For precision panel sizing of laminated or raw MDF and Particle board. Used in panel saw and beam saw applications.
Features
Exceptionally hard and wear resistant Micromax VF-01 carbide. Precision honed ultra sharp teeth. Opteco Sofsound System for reduced noise. Copper silencing elements.
Shipping
Usually ships within 2-5 business days, we will notify you if there are any further delays. Please allow up to 7 days for remote areas.
Also Available:
Saw Blade Bushes
Opteco 300mm x 96T Extrusions
Part Number
7203003096 - 300mm x 30mm bore x 96T x 3.3/2.8mm kerf/plate TRIPLE CHIP - Thin / medium extrusions
Application
For cutting thin to medium section aluminium sections and extrusions
Features
Negative triple chip tooth. Copper silencing elements.
Shipping
Usually ships within 2-5 business days, we will notify you if there are any further delays. Please allow up to 7 days for remote areas.
Also Available:
Saw Blade Bushes
Opteco 300mm x 96T Fine cut
Part Number
9103003096 - 300mm x 30mm bore x 96T x 3.2/2.2mm kerf/plate ATB - Fine cut, joinery/panel sizing
Application
For trimming and panel sizing laminated boards, acrylics, plywoods, natural timber. Used in panel saw applications.
Features
Positive ATB tooth with approx. 10mm pitch for fine surface finish. Copper silencing elements.
Shipping
Usually ships within 2-5 business days, we will notify you if there are any further delays. Please allow up to 7 days for remote areas.
Also Available:
Saw Blade Bushes
Opteco 300mm x 96T Fine cut saw
Part Number
8103003096 - 300mm x 30mm bore x 96T x 3.2/2.2mm kerf/plate T.Chip - Fine cut, joinery/panel sizing
Application
For precision panel sizing of laminated or raw MDF and Particle board. Used in panel saw and beam saw applications.
Features
Positive triple chip tooth with copper silencing elements.
Shipping
Usually ships within 2-5 business days, we will notify you if there are any further delays. Please allow up to 7 days for remote areas.
Also Available:
Saw Blade Bushes
Opteco 305mm x 60T Crosscut
Part Number
22030525460 - 305mm x 25.4mm bore x 60T x 2.4/1.6mm kerf/plate ATB - Fast Crosscut, medium/fine finish
Application
Shallow ripping cuts with fine surface finish. Fast crosscuts with medium / fine surface finish. Suits Makita.
Shipping
Usually ships within 2-5 business days, we will notify you if there are any further delays. Please allow up to 7 days for remote areas.
Also Available:
Saw Blade Bushes